www.kydemolitionderby.com :: View topic - KYDEMOLITIONDERBY.COM 1st annual demolition derby April 10th

kydemol1 · Site Admin

Location Albany Ky. this is possible to change but tryin to work it out for sure but have another location if falls through

TOP DOG PROMOTIONS

FREE ENTRY FEE
Big car payout
1st $1500.00
2nd $1000.00
3rd $500.00
4th $300.00
5th $200.00
WILL PAY HEAT MONEY ALSO

FREE ENTRY FEE
Small car payout
1st $1000.00
2nd $500.00
3rd $250.00
4th $150.00
5th $100.00
WILL PAY HEAT MONEY ALSO

LAWN MOWERS $20.00 entry 100% payback

MAD DOG AWARDS TBA

We originally intended to have a non kicker show but from the request of everyone we have talked to this will be a kicker show.
Thanks to everyone involved in making this a go.

For rules info contact
TOP DOG PROMOTIONS
CONTACT
JOHN PECK 859-393-8693
GARY PRATHER
DANNY WHALEN
JEREMY WAINSCOTT

For other info contact
Bradley Burton 2706344508
Mike Wall 2706344637

Any vender wanting to set up contact us.

more details to come soon.

77jr

heck yea im ready for this derby. maybe this time ill learn to put the car in gear lmfao

kydemol1 · Site Admin

Top Dog Promotions Big car rules.

1. Any 1980 and newer sedan or station wagon.
2. Helmet with eye protection and seatbelt must be worn at all times.
3. Pits 5 mph max.
4.Top 3 cars in feature are subject to re-inspection.
5. Any controversies or protest must be brought up before drivers meeting.
6. ANY QUESTIONS CALL FIRST, IF IT DOESN’T SAY YOU CAN DO IT , DON’T DO IT.
Clarification of some rules from phone calls may have to be determined the day of the derby, due to interpretation of rules by car builder.
7. Judges decision is final.
8. All glass, plastic and interior must be removed before arriving at the derby.
9. Motor swaps are allowed. Motors can be welded or chained with 2 pieces of chain no longer then 14 inches long per chain.
10. Distributor protectors are allowed but can not be connected to dash bar , or reinforce the doghouse or radiator support in any way.(CHECK SCHEDULE FOR KICKER SHOWS) You cannot have a kicker to protector from dash bar. Firewall cannot be reinforced, but you can run a 3 inch wide by ½” thick flat window bar but cannot be welded to protector.
11. You can run a 4 point around the driver witch consist of bar across the dash witch cannot be with in 5 inches of the firewall. A bar behind the seat and it must be with in 12 inches of driver seat. And 2 door bars connecting the dash and seat bar. You can run a roll over bar that has to connect to the rear seat bar. The roll bar can be welded to the frame and bolted in 3 spots to the roof. The roll bar is the only bar that can be welded to the frame.
12. You can have a rear window bar witch can be 3 inch wide ½” thick and be welded to roof and where trunk lid and speaker deck meet. If you have a slanted roll bar you cannot run a rear window bar...
13. Gas tank protector may be used. These protectors can not be wider then 24 inches at the widest point no exceptions. The protector can go to the rear floor pan but not bolted or welded. If you have gone over board you will cut it out.
14. Batteries must be moved to passenger floor board and covered.
15. All outside body seams may be welded. If floors are rusty you may patch with sheet metal only.
16. Bumper shocks can be welded solid. You can run home made bumper shocks no longer then 12 inches. You can weld top frame seam with a single ¼ inch pass only. If car is rusted or pre-ran you can fix these spots with 6 4x4 ¼ inch thick plates but we must be able to see where car was rusted or bent.
17. Height limit is 22 inches to bottom of bumper max and now lower the 16 inches .
18. Bumpers are interchangeable any year. You may reinforce the 80 and newer (front only) bumpers but reinforcement must be between the bumper shocks and inside the bumper. If you are running an old iron bumper on 80 and newer car you cannot reinforce it.
19. You may bolt or wire you hood in 6 places, hood must have 12x12 hole. Core support may be wired to front bumper, but no wire in front of the radiator. You may run two 2 inch wide ¼ thick straps from core support to bumper. You can run a 36 inch piece of angel in center of radiator support on top . If radiator support needs repaired you must use sheet metal. Hood must be open for inspection.
20. You can weld the trunk with 3 inch ¼ thick metal. You can run three 3 inch wide ¼ thick straps from the trunk lid to rear bumper. If car is wedged or unable to see in trunk you may be asked to cut a hole in it for inspection reasons.
21. You can remove the factory body bolts and replace with 1 inch all thread and 3 inch washers max 1 inch gap between body and frame. You can run all thread up through the hood and use as hood bolt. All washer must be in the frame and not hinder from seeing in frame.
22. .You can run any 5 lug rear end and rear end protector that must be within 6 inches of the rear end. You can weld or chain coil springs in.
23. You may bolt your fenders and quarter panels with up to 6 bolts. You may repair panels if ripped open but you can only over lap rip 1 inch with sheet metal. YOU MAY NOT RE-SKIN YOUR BODY PANELS. IF YOU HAVE GONE OVER YOU WILL HAVE TO CUT IT.
24.You can reinforce the a-frame and tie rods. You can weld a-frame solid to the frame...
25. Suspension does not have to bounce. You can run solid suspension such as using all thread as shocks. You can not convert coil sprung cars to leaf.
26. All cars must have fan covered at all times.
27. You can run a 20 inch long ¼ thick hump plate that has to contour to the frame above the rear end and be welded to the outside of the frame.
28. In 2010 their will be no pinning of frame rails in anyway.

kydemol1 · Site Admin

Top Dog Promotions MINI car rules.

1. Any year 4 or 6 cylinder car with 105 inch wheel base or less. Must be unibody and no AMC pacers.
2. Helmet with eye protection and seatbelt must be worn at all times.
3. Pits 5 mph max.
4.Top 3 cars in feature are subject to re-inspection.
5. Any controversies or protest must be brought up before drivers meeting.
6. ANY QUESTIONS CALL FIRST, IF IT DOESN’T SAY YOU CAN DO IT , DON’T DO IT.
Clarification of some rules from phone calls may have to be determined the day of the derby, due to interpretation of rules by car builder.
7. Judges decision is final.
8. All glass, plastic and interior must be removed before arriving at the derby.
9. Motor swaps are allowed. Motors can be welded or chained with 2 pieces of chain no longer then 14 inches long per chain.
10. Distributor protectors are allowed but can not be connected to dash bar , or reinforce the doghouse or radiator support in any way. You cannot have a kicker to protector from dash bar. Firewall cannot be reinforced, but you can run a 3 inch wide by ½ thick flat window bar but cannot be welded to protector.
11. You can run a 4 point around the driver witch consist of bar across the dash witch cannot be with in 5 inches of the firewall. A bar behind the seat and it must be with in 12 inches of driver seat. And 2 door bars connecting the dash and seat bar. You can run a roll over bar that has to connect to the rear seat bar. The roll bar can be welded to the frame and bolted in 3 spots to the roof. The roll bar is the only bar that can be welded to the frame.
12. All electric fuel pumps must shut off with key or have a separate switch that is clearly marked..
13. Gas tank protector may be used. These protectors can not be wider then 24 inches at the widest point no exceptions. The protector can go to the rear floor pan but not bolted or welded. If you have gone over board you will cut it out.
14. Batteries must be moved to passenger floor board and covered.
15. All body seams may be welded. If floors are rusty you may patch with sheet metal only.
16. Bumper shocks can be welded solid. Bumper shocks must remain in factory location if you move them the shock can not be longer the 12 inches no exceptions. You can run home made bumper shocks (2x2 tubing) but none longer the 12 inches. If car is rusted or preran you can patch it back with a total of 6 4x4 plates ¼ thick max. WE must be able to see the rust and NO plates on fresh cars unless rusted. If preran must use plates to fix bent spots.
17. Height limit is 22 inches to bottom of bumper max and now lower the 14 inch .
18. Bumpers are interchangeable any year. You cannot reinforce bumpers.
19. You may bolt or wire you hood in 6 places, hood must have 12x12 hole. Core support may be wired to front bumper, but no wire in front of the radiator. You may run two 2 inch wide ¼ thick straps from core support to bumper. You can run a 24 inch piece of angel in center of radiator support on top . If radiator support needs repaired you must use sheet metal. Hood must be open for inspection.
20. You can weld the trunk with 3 inch ¼ thick metal. You can run three 3 inch wide ¼ thick straps from the trunk lid to rear bumper. If car is wedged or unable to see in trunk you may be asked to cut a hole in it for inspection reasons.
21.You cannot weld the sway bar to engine cradle or frame. It must stay in factory location or removed you can weld to lower a-arm..
22. .You may reinforce struts and a-arms but you cannot completely sleeve the strut. You can weld or chain coil springs in.
23. You may bolt your fenders and quarter panels with up to 6 bolts. You may repair panels if ripped open but you can only over lap rip 1 inch with sheet metal. YOU MAY NOT RE-SKIN YOUR BODY PANELS. IF YOU HAVE GONE OVER YOU WILL HAVE TO CUT IT.
24.Factory leaf sprung cars can build springs to 5 leafs per side max. springs don‘t have to stagger...
25. Suspension does not have to bounce. You can run solid suspension such as using all thread as shocks. You can not convert coil sprung cars to leaf.
26. All cars must have fan covered at all times.
27. In 2010 their will be no pinning of frame rails in anyway.

T-shirt vendor

kydemol1
Hey this is Travis Brinson with Demo Derby Shirts and would love to come and set up at this event. Please let me know if this is ok.

Thanks
Travis Brinson

606-687-0599

dodson55

I was planning on running this one but I guess I will be in the stands since it's a kicker show now.

hollywood

What more could a man want kicker and hump plate ?? Best derby's in the world

77jr

any word on the place of the derby yet

3257

77jr

ok thanks donnie

ColumbiaBoy

Roach

wow KYdemolitionderby.com+TopDog and free entry=one helluva show not to mention a kicker and arch plate Very Happy

77jr

any word on location donnie

77jr

TTT
Any word yet on location donnie

BurtonB3 · Moderator

Albany has to dig the track up to repair the water lines so we cant have it there. We are working on a few different spots around close and should know for sure within a week.